搜索

检测气体

应用行业

应用环境

测量范围

工作原理

认证类型

产品类型

重置

您现在所在的位置: 主页 > 产品搜索

产品搜索

EC410 - ELECTROCHEMICAL OXYGEN SENSOR

Oxygen sensor – different mode of operation from existing lead-based electrochemical sensors, which avoids many of the inherent problems with performance and quality seen with existing oxygen sensors. Read Application note:- EC410 Oxygen Sensor – Operation and Performance for full details.

INIR-CD5.0% - CARBON DIOXIDE SENSOR WITH INTEGRATED ELECTRONICS

Range 0 to 5% Carbon Dioxide The SGX Sensortech Integrated IR Gas Sensor provides users with a simple method of incorporating an Infrared Sensor into their gas detection instrument which will significantly reduce the development time and expertise required during the design and implementation phase.

INIR-EK4 - EVALUATION KIT FOR INIR GAS SENSORS

Evaluation Kit for testing of the INIR gas sensors. Supplied complete with connection lead and software.

INIR-ME100% - IR GAS SENSOR WITH INTEGRATED ELECTRONICS

Range 0 to 100% Methane Auto-ranges so good for measurements in the 0-5% range The SGX Sensortech Integrated IR Gas Sensor provides users with a simple method of incorporating an Infrared Sensor into their gas detection instrument which will significantly reduce the development time and expertise required during the design and implementation phase.

MICS-VZ-89TE - INDOOR AIR QUALITY MODULE

The MiCS-VZ-89TE combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor tVOCs and CO2 equivalent variations in confined spaces, e.g. meeting rooms or vehicle cabins. The dual signal output can be used to control ventilation on-demand, saving energy and reducing cost-of-ownership.

MP-7217-MINIATURE MEMS PELLISTOR FOR FLAMMABLE GAS SENSING

The MP-7217 Pellistor is commonly used, but not exclusively, in mining applications. It is a low power, intrinsically safe, extremely robust and poison resistant device The MP-7217 has been designed to provide the basic sensor performance that will enable a suitable instrument to meet the various (Group 1) mining performance standards. The MP-7217, whilst being optimised for its methane response (up to 5% volume in air), will also detect some other flammable gases and vapours.

ECVQ-EK3 - MINIATURE CATALYTIC AND ELECTROCHEMICAL GAS SENSOR EVALUATION KIT

Miniature catalytic and electrochemical gas sensor evaluation kit.

IR-EK2 - MINIATURE NDIR GAS SENSOR EVALUATION KIT

Miniature NDIR Gas Sensor Evaluation Kit

SGX-4NH3 - 4 SERIES ELECTROCHEMICAL CELL FOR AMMONIA

4 Series electrochemical ammonia sensor designed for fixed and portable applications 0-100 ppm. This sensor does not require a bias voltage.

VQ41TSB - AMMONIA AND HIGH HYDROCARBONS PELLISTOR PAIR.

Optimised for hydrogen response (limits any compensator activity) – higher hydrocarbons, little or no response to methane Ammonia/Butane Pellistor Pair, 2V/100mA

VQ547TS - AMMONIA/HIGH HYDROCARBON CERTIFIED HEAD

VQ47 Ammonia Sensor in a VQ500 head for portable applications. Good response to high hydrocarbons and virtually no response to methane

MICS-5524 - MOS FOR REDUCING GASES

SMD General Purpose CO/ Combustible Gas/ VOC Sensor. Range 10-100ppm CO

VQ31MB - THERMAL CONDUCTIVITY PELLISTOR PAIR

Pellistor Pair 3.5V/90mA, Thermal Conductivity with Closed Can Compensator, Solid Legs

VQ35MB - THERMAL CONDUCTIVITY PELLISTOR PAIR

Pellistor Pair 4.2V/55mA Thermal Conductivity with Closed Can compensator, Solid Legs

MP-7217-TC COMBINED FLAMMABLE AND VOLUME PERCENT METHANE SENSOR

Combined LEL and thermal conductivity module featuring MEMs sensor with on-board measurement range switching. The MP-7217-TC gas sensor has been designed to measure Methane over the explosive concentration range and up to 100% by volume. The explosive range is measured with the sensor in Catalytic mode where the target gas is reacted on the detector bead. The 100% volume range is measured with the detector bead replaced by a resistor and the compensating bead measuring the target gas concentration by virtue of its change in thermal conductivity.

IR11BR - HIGH PERCENTAGE VOLUME CARBON DIOXIDE SENSOR

19mm, 100% volume CO2 infrared sensor

IR604/1 - CERTIFIED IR ACETYLENE GAS SENSOR HEAD

IR Sensor Head for 0-100% LEL Acetylene – M20 Thread, built in Amplifier circuit

IR604/2 - CERTIFIED IR ACETYLENE GAS SENSOR HEAD

IR Sensor Head for 0-100% LEL Acetylene – 1/2″ Thread, built in Amplifier circuit

IR604/3 - CERTIFIED IR ACETYLENE GAS SENSOR HEAD

IR Sensor Head for 0-100% LEL Acetylene – 3/4″ Thread, built in Amplifier circuit

MICS-EK1- MOS GAS SENSOR EVALUATION KIT

MOS Gas Sensor Evaluation Kit Can be used for both the single sensors and dual gas sensors. It cannot be used for the MICS-6814 triple sensor

MICS-SMD-PCB5 - SPARE ADAPTER PCBS FOR THE MICS-EK1

SMD Adapter PCBs for MICS-EK1 – pack of 5

SGX-7OX

7 Series O2 sensor 0-25% 2 year life

DAS546632AA - WEATHER PROTECTION COVER

Weather protection cover for IR600 and VQ600

DAS546633AA - FLOW CAP ADAPTOR

Flow cap adaptor for use with IR600 and VQ600 series

DPP546618DA - CALIBRATION HOOD

IR600 and VQ600 Series Calibration Hood

EC4-1000-H2

4 series H2 gas sensor 1000ppm

EC4-200-CL2

4 series Chlorine sensor 200ppm range

EC4-2000-NO

4 series NO gas sensor 2000ppm

EC4-2000-SO2 - ELECTROCHEMICAL CELL FOR SULPHUR DIOXIDE

4 series SO2 gas sensor 2000ppm

EC4-50-CLO2

4 series chlorine dioxide gas sensor 50ppm

MICS-2714 MOS FOR OXIDISING GASES

SMD Nitrogen dioxide sensor range 50 ppb to 5 ppm

MICS-4514 - DUAL METAL OXIDE SENSOR FOR OXIDISING AND REDUCING GASES

SMD Carbon Monoxide/Nitrogen Dioxide Dual sensor range 1 ppm to 1000ppm CO and 50 ppb to 5 ppm NO2

MICS-5914 - MOS AMMONIA SENSOR

SMD Ammonia Sensor – range 100-10,000 ppB

MICS-6814 - MOS TRIPLE SENSOR

SMD Carbon Monoxide/Nitrogen Dioxide/Ammonia Triple Sensor

VQ21B - MAXIMUM POISON RESISTANT PELLISTOR PAIR.

Maximum poison resistance-gas diffusion limited by hole in detector can- Application where maximum poison resistance is required. Poison resistant Pellistor pair, 2V/300mA, Solid legs

VQ500 SERIES - RANGE OF CATALYTIC AND THERMAL CONDUCTIVITY PELLISTOR CERTIFIED 4 SERIES HEADS

--

VQ5MB - THERMAL CONDUCTIVITY PELLISTOR PAIR

Pellistor Pair 2V/175mA, Thermal Conductivity with Closed Can Compensator

VQ600 SERIES - RANGE OF CERTIFIED CATALYTIC AND THERMAL CONDUCTIVITY PELLISTOR FIXED HEADS FOR GAS DETECTION

--

VQ601/1 - COMBUSTIBLE GAS SENSING HEAD

VQ1 Pellistor, VQ600 Head, Metric Thread

VQ601/2 - COMBUSTIBLE GAS SENSING HEAD

VQ1 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ601/3 - COMBUSTIBLE GAS SENSING HEAD

VQ1 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ603/1 - COMBUSTIBLE GAS SENSING HEAD

VQ3 Pellistor, VQ600 Head, Metric Thread

VQ603/2 - COMBUSTIBLE GAS SENSING HEAD

VQ3 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ605M/1 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ5 Pellistor, VQ600 Head, Metric Thread

VQ606M/1 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ6 Pellistor, VQ600 Head, Metric Thread

VQ606M/3 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ6 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ621T/1- COMBUSTIBLE GAS SENSING HEAD

VQ21 Pellistor VQ600 Head, Metric Thread

VQ621T/2 - COMBUSTIBLE GAS SENSING HEAD

VQ21 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ621T/3 - COMBUSTIBLE GAS SENSING HEAD

VQ21 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ621TS/1 - COMBUSTIBLE GAS SENSING HEAD

VQ21 Pellistor VQ600 Head, Metric Thread

VQ621TS/3 - COMBUSTIBLE GAS SENSING HEAD

VQ21 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ622T/1 - COMBUSTIBLE GAS SENSING HEAD

VQ22 Pellistor VQ600 Head, Metric Thread

VQ622T/2 - COMBUSTIBLE GAS SENSING HEAD

VQ22 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ622T/3 - COMBUSTIBLE GAS SENSING HEAD

VQ22 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ623/1 - COMBUSTIBLE GAS SENSING HEAD

VQ23 Pellistor VQ600 Head, Metric Thread

VQ625/1 - COMBUSTIBLE GAS SENSING HEAD

VQ25 Pellistor VQ600 Head, Metric Thread

VQ625/2 - COMBUSTIBLE GAS SENSING HEAD

VQ25 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ625/3 - COMBUSTIBLE GAS SENSING HEAD

VQ25 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ631M/1 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ31 Pellistor VQ600 Head, Metric Thread

VQ631M/2 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ31 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ631M/3 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ31 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ635M/1 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ35 Pellistor, VQ600 Head, Metric Thread

VQ635M/2 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ35 Pellistor, VQ600 Head, 0.5″ 14 NPT

VQ635M/3 - THERMAL CONDUCTIVITY GAS SENSING HEAD

VQ35 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ641TS/1- COMBUSTIBLE GAS SENSING HEAD

VQ41 Pellistor VQ600 Head, Metric Thread

VQ641TS/3 - COMBUSTIBLE GAS SENSING HEAD

VQ41 Pellistor, VQ600 Head, 0.75″ 14 NPT

VQ6MB - THERMAL CONDUCTIVITY PELLISTOR PAIR

Pellistor pair 2V, Thermal Conductivity with Closed Can Compensator, Solid Legs

JAS767906AA

Standard calibration Flow Hood Assembly

JAS769638AA

Special Gases calibration Flow Hood

IR31CE

19mm, 0-5% CO2 Infrared Gas Sensor – for high pressure applications i.e. Diving

IR31SE

19mm, 0-5% CO2 Infrared Sensor – uncertified(Single Channel), with mesh

IR32BC

Series 3, 19mm 0-5%/100% HC IR Sensor – Uncertified, no mesh

IR33BC

19mm 0-5%/100% Broadband HC IR Sensor – Uncertified, no mesh

VQ10B - STANDARD PELLISTOR

Standard Pellistor pair, 2V/175mA, solid legs

VQ10SB - STANDARD PELLISTOR PAIR - OPTIMISED FOR HYDROGEN RESPONSE

Optimised for hydrogen response (limits any compensator activity) Standard pellistor pair, 2V/175mA, solid legs

VQ1B - STANDARD PELLISTOR PAIR WITH HIGH POWER AND GOOD STABILITY

Standard pellistor pair, 2V/300mA, Solid legs

VQ23TB - PELLISTOR PAIR

Poison Resistant Pellistor pair 2.5V/335mA OC solid legs

VQ2B - PELLISTOR PAIR - GUARANTEED PERFORMANCE WITH TEMPERATURE AND OPTIMUM STABILITY

Used in mining when protected with carbon cloth Standard pellistor pair, 2V/175mA , solid legs

VQ3BJ - STANDARD PELLISTOR PAIR - HIGH POWER GOOD STABILITY.

Std Pellistor Pair 2.5V/335mA Solid Legs

联系经销商 点击查看更多
实时空气质量指数
(AQI)